Vis de décompression - Valve gore-tex - couleur noir, GORE

15,90 € TTC

Nouveau produit

Notes et avis clients

GORE™ Protective Vents allows EPS Core Surfboards to pass air back and forth between the core and the exterior of the board while preventing water from entering.

Plus de détails

Service et conseil : +33 (0)5 59 47 70 17

+ 1 Points fidélité.
Points du panier 1 point soit une remise de 0,50 €.

Paiement 100% sécurisé
A partir de 75€ d'achat Paiement 3x sans frais
Produit en stock

GORE_black

CLICK HERE TO DOWNLOAD THE INSTALLATION AND USE INSTRUCTIONS

 

GORE™ Protective Vents + Shapers custom Base: for easy installation.

No more taping the surfboard, just rout out a hole and drop in the base that is pre-tapped for your convenience.

GORE™ Protective Vents allows EPS Core Surfboards to pass air back and forth between the core and the exterior of the board while preventing water from entering. This is due because EPS surfboard materials are affected by extreme temperature changes. There is a double membrane of “Gore-Tex” either side of a rubber O-ring. This membrane is waterproof this allows the vent to works by allowing air and other gases to pass through the membrane freely but stops liquids from entering the enclosure. The Gore-Tex membrane does not require any adjustment. Please note: Vents are black.

The Diameter of the base member is 32mm, we would recommend to drill a 34-36mm hole to ensure there is efficient amount of resin around to base

What is .... Gore Protective Vents for Surfboards and Watercrafts, Gore membrane vents allow the pass of air and other gases both ways while blocking the flow of liquid water. The technology behind the vent's breathability lies in our ePTFE materials. Gore microporous ePTFE membrane prevents pressure build up by constantly equalizing the difference in pressure between the inside of the enclosure and its immediate environment. This constant exchange reduces the pressure on the seals. The vent works by allowing air and other gases to pass through the membrane freely but stops liquids from entering the enclosure. The membrane offers varying flow rates and liquid protection. The industry standard for epoxy Surfcraft that utilised expanded polystyrene foam or hollow boards such as timber surfboards.

Avis

le  14 Aout 2022
(Vis de décompression - Valve gore-tex - couleur noir, GORE)

Produit conforme et livré rapidement

Difficile de trouver ces vis de décompression. J'étais pressé pour remplacer une vis que j'ai cassée. Livré rapidement j'ai pu naviguer hier.

le  18 Juin 2022
(Vis de décompression - Valve gore-tex - couleur noir, GORE)

RAS

parfaitement conforme à mon attente / livraison soignée et rapide

le  17 Sept. 2021
(Vis de décompression - Valve gore-tex - couleur noir, GORE)

A l'air top

Info technique : le pas de vis est du 12 - 1,5.

le  21 Aout 2019
(Vis de décompression - Valve gore-tex - couleur noir, GORE)

vis décompression gore

Attention au pas de vis!
je pense que c'est un pas anglais... et il existe aussi des vis visuellement très proches mais avec un pas métrique. Si vous avez d'origine des vis avec la marque gore indiquée dessus vous pouvez les utiliser. Si non méfiance !

le  24 Juil. 2018
(Vis de décompression - Valve gore-tex - couleur noir, GORE)

Conforme mais cher

Conforme à la description et bien emballé,
Le jeu est maintenant suffisant pour fonctionner avec des douilles 16 classique
En revanche 15€ c'est vraiment excessif...