Dérives & inserts

Plug de leash noir - Ø30mm - barre métal

Plug de leash 30mm de diamètre, avec barre métal - couleur : noir.  Profondeur : 11,40mm / 30mm de diamètre.

Plug de leash noir - Ø25mm - barre métal

Plug de leash 25mm de diamètre, avec barre métal - couleur : noir.  Profondeur : 11,40mm / 25mm de diamètre.

Vis de décompression - Valve gore-tex - couleur blanc, GORE

GORE™ Protective Vents allows EPS Core Surfboards to pass air back and forth between the core and the exterior of the board while preventing water from entering.

Plug de leash blanc - Ø25mm - barre métal

Plug de leash 25mm de diamètre, avec barre métal - couleur : blanc.  Profondeur : 11,40mm / 25mm de diamètre.

Dérives Twin - FEN Fiberglass Slate / Ochre, FUTURES.

The EN Fiberglass Twin is Future's xtra-large sized twin-fin, offering that classic twin fin feel. It’s a versatile option for multiple board designs that throwback to the 70’s and early 80’s.  Template Category | Neutral (balanced, all-around) Construction | Fiberglass Size | Large Twin

EVA Shim 2mm thickness

Les cales en EVA sont utilisées lors de l'installation des boîtiers de dérives et sont ajoutées sous la plaque de gabarit de la défonceuse pour ajuster le niveau.

Dérives Twin - T2 Fiberglass Indigo / Rose, FUTURES.

To fit all Post-modern Twin fins with deep double concave bottom shape... Solid Fiberglass construction combined with balanced base and height measurements provides maximum drive, while the thinner tip offers release and spring off the top. Template Category | Neutral (balanced, all-around) Construction | Fiberglass Size | Large Twin

EVA Shim 3mm thickness

Les cales en EVA sont utilisées lors de l'installation des boîtiers de dérives et sont ajoutées sous la plaque de gabarit de la défonceuse pour ajuster le niveau.

Plug de leash blanc - Ø30mm - barre métal

Plug de leash 30mm de diamètre, avec barre métal - couleur : blanc.  Profondeur : 11,40mm / 30mm de diamètre.

Dérives Twin - BMT Britt Merrick Twin - Green / Gray, FUTURES.

Britt Merrick’s new hand foiled signature twin fin set (BMT), is designed to fit between a traditional upright and keel fin. Construction | Fiberglass

Dérives Thruster - P6 RTM Hex Yellow Legacy series, FUTURES.

The P6 Legacy Series is a medium sized thruster in the Pivot template category. The reduced rake allows for tighter turns in the pocket, and the Honeycomb construction gives a balanced feel for all-around performance. Template Category | Pivot (tight turns, quick, loose) Construction | Honeycomb Ride Number | Balanced – 6.5 Size | Medium...

SUP Goretex valve pour poignée FCS

Dérives Thruster - Dual tab - Plastique - Noir - Taille L, JUST

Dérives en plastique - couleur : noir. Compatibles avec les plugs / inserts FCS ou compatibles. Un modèle de dérive économique dont le template "passe-partout" conviendra à tous types de surfeurs de plus de 70 kilos

Dérives Quad - RASTA Honeycomb Black / Teal, FUTURES.

The Rasta Quad, designed by Australian freesurfing icon Dave Rastovich, is a versatile set that will suit almost any quad option board. Size | Medium Quad (145-175 lbs) Ride Number | Balanced - 7.7  

Dérives Thruster - FAM1 RTM Hex Teal & Navy, FUTURES.

The AM1 Honeycomb designed by legendary shaper Al Merrick of Channel Islands Surfboards, is a medium size thruster in the Rake template category. Template Category | Rake (drawn-out, control, drive) Construction | Honeycomb Ride Number | Balanced – 5.8 Size | Medium (145 – 175 lbs)

Dérives Twin - RASTA Twin 2+1, Honeycomb Black / Blue, FUTURES.

The Rasta Twin +1 was developed to compliment Dave Rastovich’s classic surfing style. Similar in size to the T1, the Rasta Twin features Futures’ V2-Foil, allowing for smooth rail to rail transitions. Template Category | Neutral (balanced, all-around) Construction | Honeycomb w/ Carbon and Jute Size | Medium Twin +1

Insert footstraps 5 vis, CHINOOK

Insert footstraps 5 vis - Chinook (340). Longueur: 11.20 cm / Largeur: 1.20 cm / Hauteur: 2.50 cm / perçage diamètre standard COBRA pour vis 6mm ou vis 4,9mm (au choix dans le menu ci-dessus)

Dérives latérales pour longboard - SB1 side bites Alpha serie...

The SB1 Fiberglass Sidebite will add stability to your longboard, improving drive and hold on the face of the wave. Available as a pair, these fins are built with 4º cant angle. Template Category | Neutral (balanced, all-around) Construction | Alpha (NetPlus) Size | Small Longboard

4° installation dummy side fins - Futures.

4° installation dummy side fins - Futures. Futures Set Fins are specifically designed to help set the proper fin angles when installing Futures ILT boxes. FYI – These fins are for manufactures and cannot be used for surfing.

Mayhem Twin trailer, FUTURES.

The Mayhem twin trailer fin is a smaller than average trailer, which helps draw out turns and lends some stability and projection, yet retains a free feeling, twin fin feel. Construction | Alpha Setup | Twin Trailer

Dérives Thruster - Tokoro RTM Hex Grey design Signature series,...

The Tokoro Honeycomb fin set was designed by Hawaiian shaper Wade Tokoro as a medium flex, flat foiled fin suited for all-around conditions. Template Category | Neutral (All-Around | Fluid) Construction | Honeycomb Ride Number | Balanced – 6.4 Size | Medium (145-175 lbs)

Dérive longboard - Rudder Fiberglass Burgundy 10", FUTURES.

The Rudder 10.0” is a modern spin on a classic favorite. With an xtra-large surface area for holding your line in trim, or from a locked in noseride, the Rudder is a great template for traditional logging. Template Category | Pivot Template Construction | Fiberglass Size | X-Large Longboard

Dérives Twin - Son of Cobra Twin fin - Fiberglass Black marble,...

The Son of Cobra Twin is designed with extra cant angle to fit all Post-modern Twin fins with deep double concave bottom shape, especially the new ...Lost Cobra Killer and other Son of Cobra Round Twin. Template Category | Neutral (balanced, all-around) Construction | Fiberglass Size | Large Twin

Dérive longboard - Performance Fiberglass solid Black / Grey 6",...

The Performance 6” fin is made from a solid fiberglass panel, utilizes an all-around template shape and can be used as a stand-alone center fin, or combined with side bites to be used as a 2 + 1. Also made in 7”, 8” and 9” options to suit your preference and needs.   Template Category | Performance Longboard...

Dérive longboard - Zack Flores Fiberglass Orange / cream 9.5",...

The Zack Flores single fin is designed to get the best performance out of a modern classic longboard. This fin has the perfect blend of rake and base to hold for noserides and turns, and maintain speed while trimming. Template Category | Flex Template Construction | Fiberglass Size | Single fin

Kit d'adaptation II TAB INFILL pour dérives duela tab

Pour compléter l'espace entre l'avant et l'arrière de la fente du plug FCS II.  

Dérives Twin - Al Merrick - Channel Islands Fiberglass Keels Green...

The Al Merrick Keel (AMK) by Channel Islands is a modern take on a classic design. The AMK features a modern rake and graduated tip flex that’s finely tuned for fast, high performance surfing. Template Category | Keel (speed control, drive, trim) Construction | Fiberglass Size | Large Twin

Dérives Twin - FAMT Al Merrick RTM - Green / Gray, FUTURES.

The Al Merrick Twin +1 (AMT) generates maximum speed, drive and hold through big carves to perform around pointbreaks or lined up beach breaks. Template Category | Pivot (tight turns, quick, loose) Construction | Honeycomb Size | Medium Twin +1