Gorilla Glue Original Waterproof PU adhesive for EVA/HDPE surface repair on soft surfboards - 60ml, GORILLA GLUE

Gorilla Glue Original 60 ml – Waterproof PU adhesive for EVA/HDPE surface repair on "soft" surfboards

Specific surf use:
This Gorilla Glue Original, designed for manual use, is ideal for effectively repairing EVA covers, HDPE slicks, or leash plugs on "soft" surfboards.
Perfect for re-bonding areas that have come unstuck through use, it gives a second life to a worn board, thanks to its polyurethane adhesive activated by moisture.

Why this glue is particularly suitable:

• Controlled expansion: it slightly foams as it cures, allowing perfect filling of gaps between different porous materials (EVA, rubber, HDPE, foam…)
• 100% waterproof: the bond remains sealed even in damp environments
• Strong adhesion on various materials: wood, PU / EPS foam, rubber, plastic…
• Strength and durability: excellent performance even after exposure to water or weather

Main features:

• Format: 60 ml bottle
• Strength: Ultra-strong adhesion on EVA, HDPE, rubber
• Stretch / Expansion: fills irregular gaps
• Waterproof: perfect for surf use and marine environments
• Compatible surfaces: EVA, foam, rubber, plastics, wood, etc.
• Operating temperature: between 10 °C and 40 °C

Applications for "soft" surfboards:

• Re-bond detached EVA covers after use or impact
• Restore a lifting HDPE bottom slick
• Secure a partially detached leash plug
• Repair corners or patches on weakened areas

This glue has proven remarkably effective even on slightly damp EVA, thanks to its activation by ambient moisture. It excels at filling gaps between uneven surfaces.


Usage tips – "Soft" surfboard repair (EVA, HDPE slick, leash plug)

1. Prepare the surface:
   Clean the area thoroughly: remove sand, dust, wax residues, or foam.
   A slight level of moisture on the surfaces helps activation, but avoid excess water. Lightly dampen if necessary using a slightly wet cloth or spray bottle.
2. Apply the glue:
   Shake the bottle before use. Apply a thin layer of glue to one of the two surfaces to be joined.
   ⚠️ Note: the glue expands up to 3 times its volume – avoid over-application.
3. Assemble the parts:
   Bring the two surfaces together and keep under pressure for at least 1 to 2 hours using clamps, straps, sandbags, or strong tape.
4. Full curing:
   Allow to dry for at least 24 hours at room temperature for a complete and durable bond.
5. Finishing (if needed):
   Once cured, trim or sand off any excess foam if necessary.

Key points:

• Allows quick and effective repair of boards at the end of the season.
• Product adapted to surf constraints: waterproof, strong, expandable.
• Professional format convenient for shapers and surf schools.
• Essential tool to extend the life of "soft" boards heavily used throughout the season.