Longboards are characterized by their rounded nose and long length, and they typically sport a single fin.
They are wide throughout, with a slight taper at the tail.
These are the most traditional and common blanks available in the world. Polyurethane blanks were the type of foam Clark Foam manufactured before they went out of business. Here you will find all sizes and shapes of Surfboard blanks made from Polyurethane foam manufactured by Arctic Foam and Millennium Foam.
All of the polyurethane blanks are molded to a crude form of a surfboard and need some shaping.
These EPS (expanded polystyrene) foam blanks are molded just like the traditional PU blanks. EPS foam can only be glassed with Epoxy resin, if Polyester resin is used it will destroy the EPS foam. The blanks are manufactured by Marko Foam (EPS).
Since these EPS molded blanks are molded they have the rocker and thicknesses molded into them, they need less work than the billeted blanks to finish out.
Polyurethane ARCTC Foam 9'3'' LB - Blank for longboard shaping- 1/4'' Dyed Basswood Brown stringer;
Polyurethane ARCTC Foam 9'9'' LB - Blank for longboard shaping- 3/8'' Dyed Basswood Brown stringer.
EPS 9'1'' MACHINE ALL - Marko Foam surfboard blank - 9'1,68'' x 24,29'' x 3,8'1' NO STRINGER
Polyurethane ARCTC Foam 9'9'' LB - Blank for longboard shaping- T-band 3/8'' Bass + 2 x 1/8" red cedar
ARCTIC Foam 9'9'' LB longboard 3'8 red cedar stringer
EPS 9'1'' MACHINE ALL - Marko Foam surfboard blank - 9'1,68'' x 24,29'' x 3,81'' 3/8" ply, nat