Pieds - ' | Mêtres - m |
---|---|
5'4 | 1,63 |
5'6 | 1,68 |
5'8 | 1,73 |
5'9 | 1,75 |
5'10 | 1,78 |
6'0 | 1,83 |
6'1 | 1,85 |
6'2 | 1,88 |
6'3 | 1,90 |
6'4 | 1,93 |
6'5 | 1,96 |
6'6 | 1,98 |
6'7 | 2,01 |
6'8 | 2,03 |
6'9 | 2,06 |
6'10 | 2,08 |
6'11 | 2,10 |
7'0 | 2,13 |
7'1 | 2,16 |
Pieds - ' | Mêtres - m |
---|---|
7'4 | 2,23 |
7'5 | 2,26 |
7'6 | 2,29 |
7'8 | 2,34 |
7'9 | 2,36 |
7'10 | 2,39 |
8'0 | 2,44 |
8'2 | 2,49 |
8'6 | 2,59 |
8'10 | 2,69 |
9'0 | 2,74 |
9'2 | 2,79 |
9'6 | 2,90 |
9'10 | 3,00 |
10'0 | 3,05 |
10'2 | 3,10 |
10'6 | 3,20 |
10'10 | 3,32 |
11'0 | 3,35 |
Pouces - " | Centimètres - cm |
---|---|
17" | 43 |
17 1/4" | 44 |
17 1/2" | 44,50 |
17 3/4" | 45 |
18" | 45,72 |
18 1/16" | 45,88 |
18 1/8" | 46,04 |
18 3/16" | 46,20 |
18 1/4" | 46,36 |
18 5/16" | 46,51 |
18 3/8" | 46,66 |
18 7/16" | 46,83 |
18 1/2" | 46,99 |
18 9/16" | 47,14 |
18 5/8" | 47,30 |
18 11/16" | 47,46 |
18 3/4" | 47,62 |
19" | 48 |
19 1/4" | 49 |
19 1/2" | 49,50 |
19 3/4" | 50 |
20" | 51 |
20 1/2" | 52 |
20 3/4" | 52,5 |
21" | 53 |
21 1/4" | 54 |
21 3/4" | 55 |
22" | 56 |
Pouces - " | Centimètres - cm |
---|---|
1 7/8" | 4,76 |
2" | 5,08 |
2 1/16" | 5,24 |
2 1/8" | 5,40 |
2 3/16" | 5,56 |
2 1/4" | 5,71 |
2 5/16" | 5,87 |
2 3/8" | 6,03 |
2 7/16" | 6,19 |
2 1/2" | 6,35 |
2 5/8" | 6,67 |
2 3/4" | 6,98 |
3" | 7,60 |
3 1/8" | 8 |
3 1/4" | 8,30 |
3 3/8" | 8,70 |
3 1/2" | 9 |
Retro fish Kit including : a surfboard polyurethane blank, necessary quantity of fiberglass, corresponding quantity of polyester resin, one deck plug, 125ml of catalyst, 125ml of wax in styrene, 2 syringues for measuring volumes of additives, tongue depressors for mixing, 3 pair of latex gloves, a rice paper sheet for printing yor own logo.
Thruster Kit including : a raw surfboard polyurethane blank, necessary quantity of fiberglass, corresponding quantity of polyester resin, one deck plug, 125ml of catalyst, 125ml of wax in styrene, 2 syringues for measuring volumes of additives, tongue depressors for mixing, 3 pair of latex gloves, a rice paper sheet for printing yor own logo.
Malibu Kit including : a raw surfboard polyurethane blank, necessary quantity of fiberglass, corresponding quantity of polyester resin, one deck plug, 125ml of catalyst, 125ml of wax in styrene, 2 syringues for measuring volumes of additives, tongue depressors for mixing, 3 pair of latex gloves, a rice paper sheet for printing yor own logo.
Longboard Kit including : a raw surfboard polyurethane blank, necessary quantity of fiberglass, corresponding quantity of polyester resin, one deck plug, one US box, 125ml of catalyst, 125ml of wax in styrene, 2 syringues for measuring volumes of additives, tongue depressors for mixing, 3 pair of latex gloves, a rice paper sheet for printing yor own logo.
Egg / Evolutive Kit including : a raw surfboard polyurethane blank, necessary quantity of fiberglass, corresponding quantity of polyester resin, one deck plug, 125ml of catalyst, 125ml of wax in styrene, 2 syringues for measuring volumes of additives, tongue depressors for mixing, 3 pair of latex gloves, a rice paper sheet for printing yor own logo.
Starter glassing kit including all needed products to laminate your surfboard : security respirator, squeegee, brush, gloves, masking tape, cup...
Pre-shaped foam (need to be finished to shape/glass) The Hybride is a round shape which could be surf in a lot of different waves condtions. The soft tail lift and the nose vee to the tail double concave make the board easier to turn.
Pre-shaped foam (need to be finished to shape/glass) The Classic Noserider is a retro shape. Its volume and rounded nose make the paddling and the take off easier. The 50/50 rails and the deep spoon will give you much more stability during the noseriding.
Pre-shaped foam (need to be finished to shape/glass) The most radical board of our range, this shortboard will allow you to surf in many conditions. The bottom shape is single to double concave to get faster. The narrow tail and medium rails are made to make faster maneuvers.
Pre-shaped foam (need to be finished to shape/glass) The Retro Fish is a board which works from 2' to 5' waves. The rocker is flat but there is a little tail kick to make shorter turns. Medium rails and simple to double concave bottom shape.
Hexcel fiberglass 1522 - 4 oz - 125gm - 76,5cm (price per meter - choose needed quantity). Our choice for your wide boards which have to remain light.
Hexcel fiberglass 471 - 5.5 oz - 206 gr/m - 80cm width (price per meter - choose needed quantity)
Hexcel fiberglass 1184 - 5.5 oz - 202g/m - width 80cm (price per meter - choose needed quantity)
6Oz (202Grs) Aerialite 7533 fiberglass fabric - sold by linear meter - width 80cm
Reinforcement carbon uni-directional, width 75mm. It's a small investment to extend the life of your stick!
Reinforcement tapes Vector Net XP 226 - 1" Diamond Pattern (50cm), ESF TECHNOLOGY The diamond pattern is 1" span and material is used for SUP's and full bottoms of shortboards. Give it a try if you want more strength, and more flex, with less weight.
Polyester resin SILMAR 249 BB - 5.63 Kgs Tin (5 liters)
Polyester resin SILMAR 249-A - 5.63 Kgs Tin (5 liters)
Polyester resin SILMAR 249 BFH - 5.63 Kgs (5 liters).
Polyester finishing resin containing surfacing agent and deicated to gloss finish