Screw, inserts, straps 

PVC installation templates for Futures box reinforcement inserts in...

PVC installation templates for Futures box reinforcement inserts in airex. It is advisable to use a router equipped with a flush cutter

16 CHINOOK BLACK US BOX for foil

Foil track US Box - 16 inches - Chinook. Strong case, suits for strong constraints. Dimensions : Lenght: 425 mm Width: 50 mm Box high: 26,5 mm

AIREX reinforcement for Futures fin boxes.

AIREX reinforcement for Futures fin boxes. Includes 2 inserts for 3/'4'' and 1 insert for 1/2'' Size : L 16.5 cm x l 5.2 cm x h 1.6 cm Sold WITHOUT the FUTURES ILT boxes.

AIREX reinforcement for footstrap insert 5 screws, Chinook

AIREX reinforcement for footstrap insert 5 screws, Chinook. for wing foil, surf foil, tow-in. Size : L 12.8 cm x l 2.9 cm x h 3.5 cm Sold WITHOUT the 5 holes insert.

Installation plate in AIREX for attaching a foil to your board

Installation plate in Airex (70Kg/m3) for attaching a foil to your board (wingfoil , windfoil, supfoil, surffoil). Size : 32 cm x 17 cm x 3.5 cm Sold WITHOUT the two US BOX FUTURES 10.75'' boxes. 90 mm center distance between the two cases.

SUP Goretex valve for FCS SUP handle

2 Hole, Strap Insert, Chinook (341)

2 Hole, Strap Insert, Chinook (341) Lenght : 3.80 cm / Width : 1.30 cm / High: 2.50 cm / Chinook N350 diameter drilling for 6 mm screws

COBRA 6mm screw (645)

COBRA 6mm screw

5/8" Vent, Retrofit, with Slot Screw, Chinook (309)

  5/8" Vent, Retrofit, with Slot Screw, Chinook (309)

5 Hole, 4" Adjustable Strap Insert, Chinook (340)

5 Hole, 4" Adjustable Strap Insert, Chinook (340) Lenght : 11.20 cm / Width : 1.20 cm / High: 2.50 cm / COBRA standard diameter drilling for 6mm screws or 4.9mm screws (choose from the menu above)

Adjustable Fin Bolt Longboard adjustable fin bolt

  No more tools needed for your ''US Box'' type fin: ''Wonderbolt'' allow you to hand-screw your fin !!

Vent, Slot Screw with O Ring, Chinook (318)

  Vent, Slot Screw with O Ring, Chinook (318)

GORE Air vent and base

  GORE™ Protective Vents allows EPS Core Surfboards to pass air back and forth between the core and the exterior of the board while preventing water from entering.

Aluminum Vent, Slot Screw with O Ring, Chinook (319)

  Aluminum Vent, Slot Screw with O Ring, Chinook (319)

1" Vent for Molded Boards, with Slot Screw, Chinook (308)

  1" Vent for Molded Boards, with Slot Screw, Chinook (#308)

Poignee SUP FCS Handle

Please note: the handle is sold without the Gore-Tex decompression valve.