Epoxy Resin SR Surf Clear EVO from Sicomin

SICOMIN SR SURF CLEAR EVO EPOXY RESIN FOR SURFBOARDS

Surf Clear EVO is an epoxy system specially formulated for the manufacture of surfboards, stand-up paddle, wave-ski, skim-board.
This product is suitable for manual or vacuum lamination of glass fabrics , carbon, aramid, synthetic or natural fibers (linen, coconut, silk, etc.).
The Surf Clear EVO is compatible with all sandwich cores: wood, balsa, polystyrene, polyurethane, PMI, linear or reticulated PVC ...
Surf Clear EVO is miscible with all fillers used in the surf industry: glasscell, microballoons, silicell...

SICOMIN is strongly involved in eco-development responsible. As soon as it is technologically possible and the raw materials are available, we systematically choose renewable chemical structures produced by nature and biomass.
Surf Clear EVO resin is produced with a green carbon rate of approximately 40% (resin alone).



CHARACTERISTICS OF SICOMIN SR SURF CLEAR EVO EPOXY RESIN

SR SURF CLEAR EVO EPOXY resin is specially designed for the manufacture of surfboards.

Handling
Characteristics

Specificities
of Surf Clear Evo

Density
Kg/litre

Viscosity
CPS

Lamination
Impregnation of fiberglass layers

Plugs & inserts
Installation

Hotcoat
Sealing and finishing coat

COMPARATIVE ANALYSIS OF THE MECHANICAL PROPERTIES OF SR SURF CLEAR EVO EPOXY RESIN

The mechanical properties are the same for SR Surf Clear Evo and SR Surf Clear Evo 2 by Viral resins. The difference lies in the addition of an accelerator and optical brightener for the SR Surf Clear Evo 2 by Viral.


COMPARATIVE ANALYSIS OF CURING TIMES OF SR SURF CLEAR EVO RESIN

Curing times vary depending on the hardener used.

OUR SELECTION OF SURF CLEAR EVO 2 SICOMIN PRODUCTS