EPS surfboard blanks 

These EPS (expanded polystyrene) foam blanks are molded just like the traditional PU blanks. EPS foam can only be glassed with Epoxy resin, if Polyester resin is used it will destroy the EPS foam. The blanks are manufactured by Marko Foam (EPS).

Since these EPS molded blanks are molded they have the rocker and thicknesses molded into them, they need less work than the billeted blanks to finish out.

Filters

Enabled filters:
Size of the blank
Stringer
Results 1 - 1 of 1 item