No products
Tools and consumables
Find here all necessary tools for surfboard lamination : buckets, squeegees, adhesives, brushes....
- D.I.Y. Solutions
- Shaping
- Glassing
- Sanding
- Fins and fins boxes
- Deco
- Hardware
- Skate
Filters
-
Mixing buckets
Buckets, graduated or not, necessity for your laminations, hot-coats, paints dilutions...
-
Squeegees
In latex by Thalco brand, or in plastic, the squeegee is the essential tool to distribute the resin and fill the fiber on your surfboard
-
Brushes
... some brushes specially designed and hold together for the work in resins or solvants (acetone) :
- width of 20mm or 60mm for ding repairs or the fitting of silk (logos)...
- wider 120mm or 150mm. Some very wide brushed "spalter", used to spread the resin while hot-coating the board.
-
Adhesives
... some masking tape with different widths and also adhesive colored tapes to realize easily your "pinlines".
-
Others
Glues, scissors, pump dispensers, pipettes, syringes, mixers...
-
SPREADER SQUEEGEE 5"
This 5" Spreader is great for ding repair, tight areas, or quick jobs. Can be reused.
3,90 € In Stock -
SPREADER SQUEEGEE 4''
This 4'' Spreader is great for ding repair, tight areas, or quick jobs. Can be reused.
3,80 € In Stock -
-
MASKING TAPE - Width 50MM
3M Adhesive masking tape - width 50mm. Use recommended for laminating, making hot-coat or decorations.
4,50 € In Stock -
Wooden mixers
Polite wood mixers, with round off extremities, delivered by 25, 50 or 100 pieces. Dimension: 150mm lenght and 18mm width.
0,90 € In Stock -
MASKING TAPE - Width 19MM
3M Adhesive masking tape - width 19mm. Use recommended for laminating, making hot-coat or decorations.
1,50 € In Stock -
MASKING TAPE - Width 9.5MM
3M Adhesive masking tape - width 9.5mm. Use recommended for fixing Futures fins boxes or for the realization of decorations and pinlines.
1,98 € In Stock -
120mm width SPALTER BRUSH
Special aceton and resin spalter pinsel - 120mm. Spalter 120mm (wide brush), ideal for the hot-coat.
11,50 € In Stock -
60ml syringe with conical tip
Measure easily catalyst or paraffined styrene necessary for your resin preparation (lamination, hot-coat) with this 90 ml volume syringe. Single use.
0,70 € In Stock -
RICE PAPER FOR PRINTING
Rice paper, sheet (A2). The printing of logos and other images is generally made on a rice paper, included then between the foam and the layer of fiber at the time of lamination. This paper is very fine and becomes totally transparent once laminate.
1,20 € In Stock -
MASKING TAPE - Width 4.6MM
3M Adhesive masking tape - width 4,6mm. Use recommended for masking stringer of your blank or for the realization of decorations and pinlines.
1,90 € In Stock -
MASKING TAPE - Width 8MM
3M Adhesive masking tape - width 8mm. Use recommended for masking stringer of your malibu or longboard blank, or for the realization of decorations and pinlines.
2,30 € In Stock -
MASKING TAPE - Width 3.6MM
3M Adhesive masking tape - width 3,6mm. Use recommended for masking stringer of your blank or for the realization of decorations and pinlines.
1,70 € In Stock -
Dispenser for catalyst or styren - 15ml graduated - clearcolor
500ml x 15cc catalyst or styren dispenser. Clear color. Inescapable in all the glassing workshops !
15,00 € In Stock -
Spray of AIRTAC 2 glue (679ml)
Spray of AIRTAC 2 glue (679ml) The solution to fix temporarily your patches of reinforcements, easily and cleanly.
18,90 € In Stock -
140mm width SPALTER BRUSH
Special aceton and resin spalter pinsel - 140mm. Spalter 140mm (wide brush), ideal for making hot-coat of SUP or any other board with many surface.
12,80 € In Stock -
60mm width BRUSH
Special aceton and resin brush - 60mm. 60mm brush, suits to the applications of your fillers, decoration paints, or the other repairs.
4,60 € In Stock -
LATEX THALCO SQUEEGEE 90cm
The most used rubber for laminating fiberglass cloth on shaped blanks.
58,00 € In Stock -
1.5'' lamintaing brush
Special aceton and resin brush - 1.5'' / 38mm. Raw wooden sleeve.
2,30 € In Stock -
20mm width BRUSH
Special aceton and resin brush - 20mm. 20mm brush, suits to the applications of your fillers, decoration paints, sticking of glass-on fins or the other repairs.
2,20 € In Stock -
3'' lamintaing brush
Special aceton and resin brush - 3'' / 76mm. Raw wooden sleeve.
3,90 € In Stock -
30mm width BRUSH
Special aceton and resin brush - 30mm. 30mm brush, suits to the applications of your fillers, decoration paints, sticking of glass-on fins or the other repairs.
2,95 € In Stock -
4'' lamintaing brush
Special aceton and resin brush - 4'' / 100mm. Raw wooden sleeve.
5,50 € In Stock -
Dispenser for catalyst or styren - 15ml graduated - green color
500ml x 15cc catalyst or styren dispenser. Green color. Inescapable in all the glassing workshops !
18,00 € In Stock -
1'' lamintaing brush
Special aceton and resin brush - 1'' / 25mm. Raw wooden sleeve.
1,60 € In Stock -
Dispenser for catalyst or styren - 15ml graduated - orange color
500ml x 15cc catalyst or styren dispenser. Orange color. Inescapable in all the glassing workshops !
18,00 € In Stock -
Dispenser for catalyst or styren - 15ml graduated - blue color
500ml x 15cc catalyst or styren dispenser. Blue color. Inescapable in all the glassing workshops !
18,00 € In Stock -
- 1
- 2