No products
Prices are tax included Prices are tax excluded
Top sellers
-
-
Snap in Coarse Angle Blade, MICROPLANE
MICROPLANE Snap In Coarse Angle Blade. Razor-sharp, stainless steel Microplanes® allow for rapid smoothing and shaping of all surfboard foams. They are durable, non-clogging and rust-resistant.
-
-
Montana PRO matt effect acrylic vernish / spray
This varnish will allow to protect all your paint works of the UV of the sun and the multiple attacks of the ocean, by giving a matt effect to the covered surface. Ultra fast drying.
9,95 € In Stock -
WHITE POSCA PAINT MARKER PC17K (15mm extra broad tip)
POSCA paint marker, color WHITE, extra broad tip 15 mm. Its 15mm wide square tip is great for large surface !
10,80 € In Stock -
Shortboard Rail Gauge
The "rail" contour gauge allows you to reproduce the cutting lines and curves of a surfboard rail. Total Length | 19.5 cm Total Width | 10 cm Working Length | 12.1 cm Working Width | 3.7 cm
9,50 € In Stock -
CAPTAIN FIN CO - Longboard Fin - Alex Knost Sunshine Flex V2 9.0
Balanced swept fin, raked with a thin tip for responsive logging. Based off Alex’s original Sunshine template but constructed from 100% Volan fiberglass for a springy, lively flex. Template | Raked—swept, raked template with a thin tip for responsive logging. Construction | Fiberglass Ideal Board | Longboards
115,00 € In Stock -
YELLOW POSCA PAINT MARKER PC17K (15mm extra broad tip)
POSCA paint marker, color YELLOW, extra broad tip 15 mm. Its 15mm wide square tip is great for large surface !
10,80 € In Stock -
RED POSCA PAINT MARKER PC17K (15mm extra broad tip)
POSCA paint marker, color RED, extra broad tip 15 mm. Its 15mm wide square tip is great for large surface !
10,80 € In Stock -
DARK GREEN POSCA PAINT MARKER PC17K (15mm extra broad tip)
POSCA paint marker, color DARK GREEN, extra broad tip 15 mm. Its 15mm wide square tip is great for large surface !
0,00 € In Stock -
Gorilla Epoxy Glue for surfboard ding repair - 25ml, GORILLA GLUE
Gorilla Epoxy 0.85 oz (≈ 25 ml) – Two-part adhesive for surfboard ding repair
13,50 € In Stock -
10'2'' B Longboard - Green Density - Bass and Dark woods triple...
US Blanks 10'2" B designed by Bruce Jones for the shape of a Longboard - 3 stringers - 3/8'' Dark wood - 3/8'' Basswood - 3/8'' Dark wood Dimensions | 10'2 1/4' x 25 3/16" x 3 1/2" Stringer | 3 stringers - 3/8'' Dark wood - 3/8'' Basswood - 3/8'' Dark wood Density | Cruiser Weight (Green Density) Volume | 120.6 L
421,90 € In Stock -
WHITE POSCA PAINT MARKER PC5M (2.5mm medium point)
POSCA paint marker, color WHITE, medium point tip 1.8-2.5 MM. Great for detailed work.
4,70 € In Stock -
Travel boardbags 6'3'' - Surfboard cover, JUST
MULTI-BOARD TRAVEL COVER. Designed for functionality, protection, and ease of travel, this multi-board 6'3'' bag is built to meet the demands of serious surf missions while keeping the design sleek and purposeful.
120,00 € In Stock -
8'2'' AX - Green Density - 1/4'' Dark wood stringer, US BLANKS
US Blanks 8'2'' AX design by Pat Rawson for the shape of a "Big Guy" Mid Length or a Grand Fish - Latte 1/4" Dark Wood Dimensions | 8'2 1/2" x 25" x 4 7/16" Stringer | 1/4'' Dark wood Density | Cruiser Weight (Green Density) Volume | 113,1 L
241,30 € In Stock -
5'9'' P Shortboard - CT Foam Yellow Density - 1/8'' - 3 Ply...
US Blanks 5'9" P designed by Timmy Patterson for the shape of a performance shortboard - 1/8" slat - 3 Ply Black/Black/Black stringer Dimensions | 5'9 5/8'' x 19 3/8" x 2 7/16" Stringer | 3 Ply Black/Black/Black Density | CT Foam (Yellow Density) Volume | 32,2 L
114,50 € In Stock -
Captain Fin co. Twins / Keels Single Tab - Andy Davis Fiberglass...
Raked back keel fin allowing for slightly more performance than your average keel. Designed in collaboration w/ Andy Davis Template | Drive Construction | Fiberglass Flex | Stiff
115,00 € In Stock -
CAPTAIN FIN CO - Alex Knost BMT Bonzer 7.0 Brown
Alex Knost signature Bonzer template, made of 100% Volan glass for a lively flex and spring out of turns. Template | Bonzer Construction | Volan Ideal Board | Bonzer
125,00 € In Stock -
FCS II CARVER Neo glass EcoBlend Small Quad Rear
The Carver template in Neo Glass Eco offers powerful, drawn-out turns and excels on open face waves. Template | Powerful, drawn out turns Construction | Neo Glass Eco Size | Small (50kg - 65kg)
49,00 € In Stock -
FCS II ACCELERATOR Neo glass EcoBlend Large Tri
The Accelerator Neo Glass Eco offers speed, flow and response with added control. It excels in critical conditions. Template | Controlled, high speed turns Construction | Neo Glass Eco Size | Large (75kg - 95kg)
85,00 € In Stock -
Gorilla Contact Adhesive Tube for wetsuits repair - 75gr, GORILLA GLUE
Gorilla Contact Adhesive Tube – Transparent Neoprene Contact Glue for Wetsuit Repairs
12,30 € In Stock -
Gorilla Glue Original Waterproof PU adhesive for EVA/HDPE surface...
Gorilla Glue Original 250 ml – Waterproof PU adhesive for EVA/HDPE surface repair on "soft" surfboards
21,95 € In Stock -
Gorilla Glue Original Waterproof PU adhesive for EVA/HDPE surface...
Gorilla Glue Original 60 ml – Waterproof PU adhesive for EVA/HDPE surface repair on "soft" surfboards
9,95 € In Stock -
9'8'' Y Longboard - Green Density - Red and Dark woods triple...
US Blanks 9'8" Y designed by Renny Yater for the shape of a Longboard - 3 stringers - 1/8'' Redwood - 3/4'' Dark wood - 1/8'' Redwood Dimensions | 9'8 1/8' x 25 1/4" x 3 5/8" Stringer | 3 stringers - 1/8'' Redwood - 3/4'' Dark wood - 1/8'' Redwood Density | Cruiser Weight (Green Density) Volume | 118.7 L
364,70 € In Stock -
1000 GRIT WET SANDPAPER (100 SHEETS)
Rhynowet, 1000 grit wet sandpaper (100 sheets).
72,00 € In Stock -
7'2'' MF Fish - Polyola Green density, ARCTIC FOAM
Polyurethane ARCTIC Foam 7'3 5/8" x 24" 1/4 x 3 1/2" Polyola MF blank for Fish, Egg, Retro Single shaping - 3/16" Basswood Nat stringer. Dimensions | 7'3 5/8" x 24" 1/4 x 3 1/2" Stringer | 3/16" Basswood Nat Density | Normal (Green Density) Volume | 84,6 L
151,00 € Out of stock -
9.75 longboard single fin - Red tint fiberglass
The single longboard fin JUST 9.75“ - Fiber Red is a model dedicated to For longboard use. A very well balanced fin for those looking for versatility, between powerful turns and cruising. Colors | Red Construction | Fiberglass Rider weight | Any size Height | 24.7cm (9.75") Basis | 18cm (7") Compatibility | With all US Boxes
72,00 € In Stock -
Longboard fin - Jesse Gugliemana Pivot 9.75 - Brick, CAPTAIN FIN CO
Jesse Guglielmana signature pivot template, great for noseriding and smooth arcing turns. Template | Pivot for quick direction changes with control Flex | Stiff Construction | Fiberglass Construction Ideal board | Longboard
95,00 € In Stock
