No products
Prices are tax included Prices are tax excluded
Adapter allowing to adapt american tools having a 5/8" threading on the european machines (M14). Use it for most part of 3M pads and Power Pads.
This foam shaping block is ergonomic and permit an easy, effective and homogeneous sanding work on a surfboard blank. Size: 26 x 21 cm To associate with the Polinet sanding screens (80 / 120 / 150 / 180 / 240 / 320)
Special aceton and resin brush - 3'' / 76mm. Raw wooden sleeve.
Block Shapers are widely used and loved by professional shapers all around the planet. They use it for obvious reasons: a light, practical and comfortable tool to use, which allows foam to be worked with precision and homogeneity.
Special aceton and resin brush - 30mm. 30mm brush, suits to the applications of your fillers, decoration paints, sticking of glass-on fins or the other repairs.
FGH pigment, color "Red" - 30 grams. Polyester and epoxy resins compatible.
The ABEK1 6059 gas and vapor filter protects against organic, inorganic vapours, acid gases and ammonia.
Tube cover - 120 microns PE tubular vacuum film - width 90cm Sold by the linear meter.
Sticky Bumps Original Tropical Wax is long lasting and easy to apply. Optimal for water temps from 69°F / 20°C and above. Original Blueberry Scent Non-Toxic / Biodegradable / All-Natural For Best Performance – Use Sticky Bumps basecoat under any of their temperature-specific waxes.
Styrene monomer, useful to fluidify your resin, and so facilitate the hot-coat of your surfboard. Conditioning : 1 liter.
Double-sided polish pad with wool blend. The Buffpad is used to polish out a Glosscoat and bring it to a shine.
Durcisseur époxy SD Surf Clear FAST
Aluminum Vent, Slot Screw with O Ring, Chinook (319)
Polyester resin SILMAR 249 BFH - 5.63 Kgs (5 liters).
Ultra fast dry Excellent coveragePolyester, polyuréthane, époxy compatible Cheap !!!
Plug FCS II 5o The FCS II system has been designed to perform at the highest level by seamlessly connecting 3 essential elements in surfing; the surfer, the surfboard and the fins. When paired with fins from the new FCS II Essential Series, it’s now possible to install and remove your fins in seconds, without the need for any screws or tools.
Plug FCS II 0o The FCS II system has been designed to perform at the highest level by seamlessly connecting 3 essential elements in surfing; the surfer, the surfboard and the fins. When paired with fins from the new FCS II Essential Series, it’s now possible to install and remove your fins in seconds, without the need for any screws or tools.
Shapers® Volan cloth - 7.5 oz - 254 gr/m2 - 76,2cm width (Per meter) Per meter Width | 76,2 cm (30'') Weight | Ultra lightweight cloth that is also highly durable. Use | Easy to wet out and cut. Designed to sit flat with superior drapability.
Special aceton and resin brush - 60mm. 60mm brush, suits to the applications of your fillers, decoration paints, or the other repairs.
Reinforcement tapes Vector Net XPC 138 - 1/2" Triaxial (50cm), ESF TECHNOLOGY The triaxial 138 style is mostly used for tail patchs. Hobie also use it for deck or bottom patchs on SUP'S.
Hexcel fiberglass 1266 - 5.5 oz - 206g/m - width 130cm (100 meters). This fabric HEX1266, width 130cm, is the one you need for your wide boards (SUP, windsurfing, etc.).
Sticky Bumps Original Warm Wax is long lasting and easy to apply. Optimal for water temps from 64°F to 74°F / 18°C to 24°C. Original Blueberry Scent Non-Toxic / Biodegradable / All-Natural For Best Performance – Use Sticky Bumps basecoat under any of their temperature-specific waxes.
3M White Line sanding disc - grit 180 (1 disc). Velcro self adhesive - 205 mm diameter.
The 3M 4251 respirator uses twin inhalation valves to reduce breathing resistance, together with bonded carbon filters, and is suitable for many applications including conventional paints, chemical manufacture and handling, paint and varnish manufacture etc.