No products
All reviews
Great sanding block
Great block for use with hook and loop sandpaper. Easily bends and retains its shape - perfect for shaping concaves.
Top of the line
The standard... use this tape and do it once, no need to waste time on fix it
Used pieces!!!
Guys the plastic slide plate is used!! It is all scratched!! Can’t believe how it could’ve happened...
Delivered completely wrong board
I ordered 6'6'' M EPS - 6'7'' x 23,98'' x 3,4'', 1/8'' Ply stringer, MARKO FOAM BUT what was delivered was the 6'0'' M.. Big change in design but they offered a 50% discount on my next EPS blank purchase.
Musthave
Amazing additive for Sicomin epoxy with fast hardener. Works really good and I am able to seal/gloss coat both sides in one day finaly.
tint
Tint of very good quality!
Tint
Tint of very good quality!
tint
Tint of very good quality!
Flexpad quality
Amazing sanding pad from Flexpad USA, works really good, long lasting quality.
Flexpad quality
Amazing sanding pad from Flexpad USA, love to work with it.
Futures
Futures quality. Easy to install, easy to sand. Different colours to match resint tints..
FCS
Classic FCS quality, strong, light and easy to install.
One Pass
Easy to use, really accurate. Even the price seems a bit high, it saves loads of time while routing finboxes for Futures...
Musthave
All shapers musthave! I can't imagine to shape boards without it anymore!
Ricepaper
Very nice rice paper. Soft, white. Logo looks really nice on it. A bit easier to use it for printing (I have to glue it to normal paper on the top and bottom, but it works good :)
Fusion
Classic FCS quality, strong, light, easy to install.
Flexpad
Flexpad quality sanding pad, works like a charm!
Quality
Harder sanding pad in Flexpad quality. Love work with it.
Singlefinbox
Easy to install, easy to sand. Very happy with this product.
Singlefinbox
Nice box, easy to instal and to sand. My favourite one definitely.
futures
Futures boxes in Futures quality. Easy to instal, easy to sand :)
6oz
Amazing cloth to work with. Strong but "soft" so easy to wrap around the rail, channels etc.
4oz
Hexcel quality. Happy to work with it.
EP217
Works excellent as written. I am using this for seal/gloss coats. Really nice self leveling of the epoxy mix and easy sanding with not as much clogging as with other epoxies I tried..
Fast Hardener
Really happy with Sicomin Fast hardener, cant compare to Medium one, but this one works really great. At the beginning I was a bit affraid of kinda short potlife (about 8mins) to laminate bigger boards (I did 7.0 biggest until now) as I do usually multicoloured tinted lam jobs, but there is no reason to be affraid at all. In Combination with Additive EP217 and SA 300 Accelerator, it works amazing for the seal/gloss coats and if the timing is ok I can make coats on both sides in one day, which was not possible with epoxies I used before.
Epoxy + Fast hardener
Really happy over all with this Sicomin Epoxy resin. Easy to work with, excellent drying times, easy to sand with not much clogging of sandpaper - with use of Additive EP217 excelent results with sealcoats and glosscoats - really fast bubbles releasing and self leveling. Never had Seal/gloss coats as flat as with this epoxy before. I did even few easy strenght test on test panels compare to other epoxies I used before (czech brand Havel Composites), but Sicomin won, more strong and flexible. Can't compare to RR or Entropy, but from the tables it seems more less the same..
Excellent investment
Great product, messed around with my homemade shaping blocks for quite a while, love this product and works fantastic
light
perfect for more strength on EPS bottom, easy to laminate, almost no weight added
EXCELLENT!
excellent product, excellent workability!
Good product and colors! Cool!
Good product and colors! Cool!
9.9 lb triple stringer
I ordered the blank as a pre shape to order. good quality blank, wide variety of rocker adjustments possible since the blank has enough thickness.
shaping block soft
Just the way i expected.
good velcro and good grip for smaller hands also.
Perfect shape
9.6 is too big for me to shape properly. This cnc feature is the perfect solution. Its fairly easy to get it smooth in 1 hour, ready for lamination proces.